The Apothecary: Sign writing and Vignettes

I posted a week or so ago the start of an assemblage in a printer’s tray – The Apothecary. Over the last few days I have been making a sign for the top, building it from foamcore board, and coating it with several layers of paint to try and match the colour of the tray. Eventually, I ended up brushing on some tan wax shoe polish and buffing it back, and adding a small amount to the wood exterior of the tray. I think it warmed up the wood and helped make the both seem a whole. The inlay ‘brass’ line is Letraset metallic tape, and the lettering and logo are cut from 160gsm card, layered four deep and then painted with Treasure Gold Liquid Leaf Florentine and then a quick layer of Classic Gold.

I’ve also taken the photos into Photoshop and added vintage effects.

Now I’ve been looking at it from the photos, and getting a little distance on it, I’m wondering if the answer to making the bottles both accessible and not able to fall out is to make a glass door and change it into a cabinet?

Continue reading

The Apothecary: an assemblage

This is very much a work in progress, but since progress seems to be going smoothly and fairly quickly, I’ve something to share mid-way. I was sorting out the sheds on Saturday and came across this printer’s half-tray that had been tucked away. I have a feeling it’s another save from my grandfather’s outhouse.

IMG_6483_w

I brushed it down, glued it back together, and then lined it with Tim Holtz French Industrial papers with Walnut Stain distress ink to blend it all in. I then set about finding all my little bottles that I’ve accumulated – a combination of Tim Holtz and Woodware. They looked a little too clean, so I’ve added Latte and Mushroom alcohol inks to give them an aged/nicotine stained look.

I raided the kitchen for every spice and herb I could get into the bottles and decided to leave one shelf free to hang some bay leaves in, and to make a mini-pestle and mortar to fit. Now all I needed was some labels, so I have spent the afternoon making my own in Illustrator and cutting them out on the Silhouette Cameo before ageing with distress inks and water. Next was working out how to get a liquid appearance in the tall bottles without it actually being liquid. UTEE came to the rescue, and I think it turned out ok – although there was some shrinkage as it cooled, so that might not remain the case. Here’s what it looks like now:

IMG_6489_w

I’ve had a lot of fun with the labels, finding the latin names for everything, including the silver balls, tapioca and hundreds and thousands. The shelf is ready for the leaves and pestle and mortar and I think a couple more adverts as well. I’m not too sure if I should stick the bottles in place, or keep them loose so that they can be pulled out… or fall off when on the wall…

 

Continue reading