I’ve been in full production mode getting stock ready for a Christmas Fayre at the end of November. All being well, there will be good footfall and matching sales. If not, anticipate a lot of listings in my Facebook and Etsy stores!
This week I’ve been concentrating on signs. The wood plaques were bought in, and then undercoated with gesso and a cream chalky finish acrylic paint. I designed all the typography in Adobe Illustrator and then etched the outlines on to the signs using my brand spanking new replacement laser cutter. After that, it was a matter of using Posca pens to fill in the gaps before doing a dirty wash with diluted acrylic paint to age them. Some had crackle medium added to the corners, but it doesn’t show up overly well. Each sign is approx. 30cm x 10cm, £5 each.
I’ve also been playing with some 10x10cm paulownia wood blocks, etching into them using the laser cutter. The laser has burnt away the soft wood more easily than the grain leaving a beautiful texture in the background. A set of four is available for £6.
Used in these projects:
- Signs and wood blocks: Creativ Company
- Laser cutter: Glowforge
- [amazon_textlink asin=’B00MWSQKTS’ text=’Posca pens’ template=’ProductLink’ store=’themanicstamp-21′ marketplace=’UK’ link_id=’f5c4e647-dd3f-11e8-b81b-73098a4b58d8′]
- [amazon_textlink asin=’B00HO038BM’ text=’DecoArt Americana Chalky Finish: Lace’ template=’ProductLink’ store=’themanicstamp-21′ marketplace=’UK’ link_id=’26127792-dd40-11e8-a16a-8f3936c4d211′]
Often, it’s the designing that takes the longest time to do when working on a new project. In this case, it was researching the Scottish Gaelic text for the first notebook, making sure what I wanted it to say really was ‘right’. The notebook has laser cut birch plywood front and back, 1.5mm thick. The Celtic knot is cut out and has a red page behind which isn’t very obvious in the pic. You’ll have to take my word for it that it is a rather effective technique. The text is quite heavily engraved which gives a dark burn that won’t rub off.
